The Oxydant Developer is a product created especially to mix with every color of thee Brow & Lash Dye. The texture of the Oxydant Cream makes it easy to mix the dyes and provides consistent and long-lasting results for all brow and lash treatments.
All supercilium Brow and Lash Dye products should be mixed on a 1:1 ratio. This means you have to use equal parts of dye and the cream developer. Mix the dye and developer together in a non-metallic dish. Mix the products until the color is consistent and the texture is smooth. Leave the dye to sit for 1 minute, before applying to the brows or lashes. This minute is needed to begin the oxidizing process and is very important to get the right results with the oxydant cream.
Note: always do a patch test at least 48 hours before using the Brow & Lash Dye or related products on new clients and clients that haven't done a tinting treatment in the last 6 months.
1x 15ml Supercilium Lash and Brow Dye of the color selected
1x 20ml Supercilium Oxydant Developer
1x Supercilium Angled Application Brush
The Brow & Lash Dye is ideal for clients wanting longer-lasting, bolder results. This brow tint not only stains the skin and hairs for darker brows but the hybrid dye can also be used to dye lashes!
The gel structure of the dye will guarantee consistent results on all skin types and give you voluminous brows and dark lashes. It can even cover up grey hairs. The Brow & Lash Dye will give the appearance of fuller brows and has a more rich and bright effect than regular dye, and takes less time to process than henna. For the lashes, it will give a darker and more dramatic look than regular eyelash tinting. No mascara is needed anymore for your tinted lashes with beauty treatments like this.
PROCESSING TIMES
Brows: For an Ombre effect on any brows remove just the fronts of the brows after 3-5 minutes with a damp cotton pad. Gentle effect: For a gentle tint effect, remove the rest of the dye after 8-10 minutes from the brow hairs to give your client a softer and more natural look. Statement look: If a stronger, more statement look is what your client desires then remove the remaining dye after 10-15 minutes. Extra bold: Finally for those clients who want the full tattooed, bold brow effect then remove the dye after the maximum processing time of 15-20 minutes resulting in dark hair.
Lashes: Subtle look: 5-7 minutes for a more subtle look suited to very fair clients with light hair or transparent lashes. Intense look: Leave on for 8-10 minutes for a deep, dark brown mascara effect.
STEPS STEP 1:Cleanse the eyebrow area/eyelashes with the Supercilium Pro Cleanser. It is also suitable for sensitive skin as it doesn't contain any harsh chemicals. For the brow area: Use the Supercilium Prep Peel Gel to get rid of excess sebum, make-up buildup, and dead skin cells to ensure the longevity of Brow Dye treatments. Apply one drop on each eyebrow, massage it gently into the brow for 15 seconds and carefully remove it with a cotton pad with Supercilium Pro Cleanser. If needed you can add a double cleanse by using the Color Booster to degrease the skin and hairs.
STEP 2:Apply Brow Paste to the area around the eyebrows, avoiding zones you are going to tint. Apply a thin layer of Brow Paste to the area around the eyes, avoiding touching the eyelashes. Set the protective eye pads along the edge of the lower eyelids, having the lower eyelashes out from under the eye pads.
STEP 3:In a non-metallic tare, mix Oxydant Developer and Brow & Lash Dye thoroughly in a ratio of 1:1 until a homogeneous consistency. We recommend using 0.5 cm of dye/ brow tint and an equal proportion of Oxydant Developer. Let the dye sit for one minute before you apply it.
STEP 4:Using a Medium Angled Brush, quickly and evenly apply a thin layer of the prepared mixture to the eyebrows, strictly to the desired shape. Carefully tint the skin with the dark brown mixture by raising the eyebrow hairs. Watch out for the clarity of the lines. Carefully and evenly apply the dye to the eyelashes. During the tinting procedure, the eyes should be closed.
STEP 5:With the dark brown Brow and Lash Dye the processing time for eyebrows is 8-20 depending on the desired result: the more intense shade and tinting effect you want, the more time you need. The processing time for eyelashes is 5-10 minutes.
STEP 6:After processing, remove the dark brown dye from the eyebrows/eyelashes with a wet cotton pad. Wash off the residues with water. Do not open the eyes until the dye is completely removed. The result of tinting depends on the type of skin, color type, individual organism characteristics.
STEP 7:If you accidentally tinted the skin, apply a small amount of Color Corrector to a micro brush or cotton swab and gently wipe this area. Repeat if needed to remove brow tint where it doesn't belong for perfectly defined arches without stains. Wash off the residues with water.
01 Cleanse the eyebrow area from makeup and other impurities with an oil-free product. If needed, additionally degrease the area with saline solution or degreaser.
02 Apply protective zone gel or paste to the area around the eyebrows, avoiding zones you are going to tint.
03 In a non-metallic tare, thoroughly mix Milkcream developer BRONSUN and Eyebrow and eyelash cream dye BRONSUN in a ratio of 1:1 until homogeneous consistency. We recommend using 0.5 cm of the dye and an equal amount of the developer.
04 Using a brush, quickly and evenly apply a dense layer of the prepared mixture to the eyebrows, strictly according to the desired shape, leaving no gaps. Thoroughly tint the skin by raising the hairs. Watch the clarity of the lines.
The exposure time for the dye on eyebrows is 10-20 minutes. The shade intensity and tinting degree on skin depends on the exposure time.
06 As the exposure time is over, carefully remove the dye with a wet cotton pad. Thoroughly rinse off the dye residues with water. The tinting result depends on the skin type, color type, individual characteristics of the skin.
In case you accidentally tinted the skin, apply a small amount of Removal composition BRONSUN onto a microbrush or cotton swab and carefully wipe this area. Repeat if needed. Rinse off the product residues with water.
Eyelash Tint Instructions:
01 Cleanse the area around the eyes from makeup and other impurities with an oil-free product. If needed, degrease the eyelashes with saline solution.
02Apply a thin layer of zone gel to the area around the eyes, avoiding contact with the eyelashes. Set the protective pads along the edge of the lower eyelids, having the lower eyelashes got out from under the pads in case you are going to tint them. In no case mix gel dye and cream dye BRONSUN
03 In a non-metallic tare, thoroughly mix Milk-cream developer BRONSUN and Eyebrow and eyelash cream dye BRONSUN in a ratio of 1:1 until homogeneous consistency. We recommend using 0.5 cm of the dye and an equal proportion of the developer.
04 Using a brush, carefully and evenly apply a dense layer of the dye to the eyelashes.
During the tinting procedure the eyes should be closed.
05 The exposure time for the dye on the eyelashes is 10-15 minutes.
06 As the exposure time is over, remove the dye with a wet cotton pad. Thoroughly rinse off the dye residues with water. Do not open the eyes until the dye is completely removed from the eyelashes. The tinting result depends on the color type, individual characteristics of the organism
MicroArtistry Lift and Tint Palette
No reviews
Regular price$19.99
85 in stock
This artist Palette makes all of your Lash lift or Brow lam OR Tinting services easy!
With separate sections for your lifting products, you can easily transport products and keep them separate for the service.
You are ready to custom blend your colors by using tinting ratios easily! You just need to fill up the sections with tint, until you have 100% of the area covered, then fill the developer section with an equal amount of your developer and mix the 2 sections together.
This tool is washable, sanitizable and reusable. You can wash and sanitize between services or purchase multiple to use through your busy day and wash them all when you are finished.
Seven cream shades that have been lovingly developed with the Brow obsessed in mind, we have taken all the best parts of the hybrid brow products we know and love and used all our technical knowledge to improve on the parts we know we don’t like
Our creamy, nourish-loaded formula is suitable for both stand-alone Hybrid Brows and is excellent when paired with your chosen Brow Lamination kit.
We have eradicated the need to counter skin undertones, but without losing any of the longevity we come to expect from our favourite Hybrid Tint range.
7-10 days on properly prepared skin & up to 6 weeks on the hair.
As a full brow color & toning system, you can mix your shades to the desired final result, and our pro palette can be used to nail those ratios.
Each Tube can do over 40 sets of brows!
Join our FREE Infinity Hybrid Masterclass! Learn how to use the line, what Hybrid is all about, download all of our Toolkit forms, and print your certificate at home!
Large 30ml (3% 10 Vol) Cream Style Oxidizer. Gentle for brows and lashes. Created with the working artist in mind, this one of a kind airless pump developer is the first on the market! This is the developer bottle of the future! No more squeezing and slamming your developer like a bottle of Ketchup trying to extract product. Formulated to be used with Infinity Luxe Hybrid Tint.