Supercilium offers a great alternative to regular brow tinting. The composition of Supercilium eyebrow dye is based on the latest innovations in hair coloring. Thanks to a careful selection of pigments, this henna does not leave a red glow on skin or hair. Henna has been used for thousands of years to transfer color onto skin, leaving a sophisticated tattoo effect and well-defined brow.

• One jar contains 7 grams, which is up to 56 applications.
• Skin: up to 2 weeks. Hairs: Up to 6 weeks. 

DIRECTIONS

Remember to always perform a patch test 48H before the treatment.

1. Mixing ratio: one spoon of Supercilium Henna powder with 15 - 20 drops of Supercilium Color Developer.  Most beauticians use half a scoop for one henna treatment. Stir well until a smooth substance is achieved. It’s important that the henna is not too runny, nor too thick.

2. Use the Supercilium Prep Peel Gel to get rid of excess sebum, make-up buildup, and dead skin cells to ensure the longevity of Brow Henna treatments. Apply one drop on each eyebrow, massage it gently into the brow for 15 seconds and carefully remove it with a cotton pad with Supercilium Pro Cleanser.  

3. Apply a layer of henna with an angled brush. Press/stamp the paint into the eyebrow until all skin is covered, back to front as well. Make sure to create sharp lines. Correct small mistakes using a cotton swab with Supercilium Color Corrector

4. Remove product at the inside of eyebrows after 3-5 minutes for an ombre effect, with a damp-not too wet-cotton pad. If still too light, reapply and leave on for another 3-5 minutes.

5. Remove the rest of the henna after 10-20 minutes. If you want to correct or lighten the brow color, use the Supercilium Color Corrector again by gently wiping over recently painted brows with a cotton swab. 

INGREDIENTS

Blond-Sodium carbonate peroxide, Cellulose Gum, P-Amino phenol, Henna, Citric Acid, Magnesium Sulfate, Sodium lauryl sulfate, Silica, m-aminophenol , Resorcinol, Aloe barbadensis Leaf Powder, P-Phenylenediamine , 4-amino-2-hydroxytoluene, Simmondsia chinensis Seed oil, Picramic acid Toluene-2,5-diaminesulfate,1,5-naphthalenediol,1-naphthol.

Auburn-Sodium carbonate peroxide, Cellulose Gum, Magnesium Sulfate, Silica, P-Aminophenol, Henna , Citric Acid, Picramic acid, Sodium lauryl sulfate, m-aminophenol , 4-amino-2-hydroxy toluene, P-Phenylenediamine , 1-naphthol, Resorcinol, Aloe barbadensis Leaf Powder, Simmondsia chinensis Seed oil, Toluene-2,5-diamine sulfate,1,5-naphthalenedio

Light Brown-Sodium carbonate peroxide, Cellulose Gum, Magnesium Sulfate, P-Aminophenol, Henna, Citric Acid, Sodium lauryl sulfate, m-aminophenol , Silica, P-Phenylenediamine , Resorcinol, 4-amino-2-hydroxy toluene, 1-naphthol, Aloe barbadensis Leaf Powder, Simmondsia chinensis Seed oil, Picramic acid ,Toluene-2,5-diamine sulfate, 1 ,5-naphthalenediol.

Medium Brown-Sodium carbonate peroxide, Cellulose Gum, P-Amino phenol, Henna, Citric Acid, Magnesium Sulfate, Sodium lauryl sulfate, Silica, m-aminophenol , Resorcinol, Aloe barbadensis Leaf Powder, P-Phenylenediamine , 4-amino-2-hydroxytoluene, Simmondsia chinensis Seed oil, Picramic acid Toluene-2,5-diaminesulfate,1,5-naphthalenediol,1-naphthol.

Dark Brown-Sodium carbonate peroxide, Cellulose Gum ,P- Phenylenediamine , P-Aminophenol ,m-aminophenol, Henna, Magnesium Sulfate, Silica, Sodium lauryl sulfate, Citric Acid, Resorcinol, 4-amino-2-hydroxytoluene, 1-naphthol, Aloe barbadensis Leaf Powder, Simmondsia chinensis Seed oil, Picramic acid,Toluene-2,5-diamine sulfate, 1 ,5-naphthalenediol.

Black-Sodium carbonate peroxide, Cellulose Gum ,p-Phenylene diamine ,Henna, Citric Acid, Magnesium Sulfate ,Silica ,Sodium lauryl sulfate, P-Aminophenol, Resorcinol, 4-amino-2-hydroxytoluene, 1-naphthol, Aloe barbadensis Leaf Powder, Simmondsia chinensis Seed oil, Picramic acid,m-aminophenol,Toluene-2,5-diamine sulfate,1,5-naphthalenediol.

Adding several drops of Supercilium Eucalyptus Color Developer to the Brow Henna mixture will set the Henna better. Besides that, it will help intensify the color by carrying it deeper into the skin and hair. Everything you need to create the long-lasting results which your clients are longing for.

The Color Developer can be mixed with different shades and colors of Brow Henna. Adding a few drops in the henna following the indicated ratio helps intensify the henna color, and have the henna better set.

Note: The Color Developer is the improved formula and substitute for our previous Rosewater Fixing Lotion. 

DIRECTIONS

Mix 10-20 drops of the Supercilium Color Developer with 1 measuring spoon (~25g) of henna powder properly until the perfect henna paste comes out. Lighter color tends to need more drops of Color Developer. The paste shouldn’t be too runny, nor too thick. The mixture should achieve a smooth, and thick-looking texture.

INGREDIENTS

AQUA (WATER), EUCALYPTUS GLOBULUS LEAF WATER, PHENOXYETHANOL, BENZYL ALCOHOL, ETHYLHEXYLGLYCERIN, DEHYDROACETIC ACID.

The Brow & Lash Dye is ideal for clients wanting longer-lasting, bolder results. This brow tint not only stains the skin and hairs for darker brows, but the hybrid dye can also be used to dye lashes!

The gel structure of the dye will guarantee consistent results on all skin types and give you voluminous brows and dark lashes. It can even cover up grey hairs. The Brow & Lash Dye will give the appearance of fuller brows and has a more rich and bright effect than regular dye, and takes less time to process than henna. For the lashes, it will give a darker and more dramatic look than regular eyelash tinting. No mascara is needed anymore for your tinted lashes with beauty treatments like this. 

PROCESSING TIMES 

Brows:
For an Ombre effect on any brows remove just the fronts of the brows after 3-5 minutes with a damp cotton pad. 
Gentle effect: For a gentle tint effect, remove the rest of the dye after 8-10 minutes from the brow hairs to give your client a softer and more natural look.
Statement look: If a stronger, more statement look is what your client desires then remove the remaining dye after 10-15 minutes.
Extra bold: Finally for those clients who want the full tattooed, bold brow effect then remove the dye after the maximum processing time of 15-20 minutes resulting in dark hair.

Lashes:
Subtle look: 5-7 minutes for a more subtle look suited to very fair clients with light hair or transparent lashes.
Intense look: Leave on for 8-10 minutes for a deep, dark brown mascara effect. 

STEPS
 
STEP 1:Cleanse the eyebrow area/eyelashes with the Supercilium Pro Cleanser. It is also suitable for sensitive skin as it doesn't contain any harsh chemicals. For the brow area: Use the Supercilium Prep Peel Gel to get rid of excess sebum, make-up buildup, and dead skin cells to ensure the longevity of Brow Dye treatments. Apply one drop on each eyebrow, massage it gently into the brow for 15 seconds and carefully remove it with a cotton pad with Supercilium Pro Cleanser. If needed you can add a double cleanse by using the Color Booster to degrease the skin and hairs. 

STEP 2:Apply Brow Paste to the area around the eyebrows, avoiding zones you are going to tint. Apply a thin layer of Brow Paste to the area around the eyes, avoiding touching the eyelashes. Set the protective eye pads along the edge of the lower eyelids, having the lower eyelashes out from under the eye pads. 

STEP 3:In a non-metallic tare, mix Oxydant Developer and Brow & Lash Dye thoroughly in a ratio of 1:1 until a homogeneous consistency. We recommend using 0.5 cm of dye/ brow tint and an equal proportion of Oxydant Developer. Let the dye sit for one minute before you apply it. 

STEP 4:Using a Medium Angled Brush, quickly and evenly apply a thin layer of the prepared mixture to the eyebrows, strictly to the desired shape. Carefully tint the skin with the dark brown mixture by raising the eyebrow hairs. Watch out for the clarity of the lines. Carefully and evenly apply the dye to the eyelashes. During the tinting procedure, the eyes should be closed.

STEP 5:With the dark brown Brow and Lash Dye the processing time for eyebrows is 8-20 depending on the desired result: the more intense shade and tinting effect you want, the more time you need. The processing time for eyelashes is 5-10 minutes.

STEP 6:After processing, remove the dark brown dye from the eyebrows/eyelashes with a wet cotton pad. Wash off the residues with water. Do not open the eyes until the dye is completely removed. The result of tinting depends on the type of skin, color type, individual organism characteristics.

STEP 7:If you accidentally tinted the skin, apply a small amount of Color Corrector to a micro brush or cotton swab and gently wipe this area. Repeat if needed to remove brow tint where it doesn't belong for perfectly defined arches without stains. Wash off the residues with water.

The Brow & Lash Dye is ideal for clients wanting longer-lasting, bolder results. This brow tint not only stains the skin and hairs for darker brows, but the hybrid dye can also be used to dye lashes!

The gel structure of the dye will guarantee consistent results on all skin types and give you voluminous brows and dark lashes. It can even cover up grey hairs. The Brow & Lash Dye will give the appearance of fuller brows and has a more rich and bright effect than regular dye, and takes less time to process than henna. For the lashes, it will give a darker and more dramatic look than regular eyelash tinting. No mascara is needed anymore for your tinted lashes with beauty treatments like this. 

The Brow & Lash Dye Kit includes everything you need for eyebrow and lash tinting.

The kit contains: 

6 colors: Auburn, Ash, Light Brown, Medium Brown, Dark Brown, Black

4 Oxydant Developers

Medium Angled Brow Brush

Color Corrector

Pro Cleanser

The Brow & Lash Dye Kit Supercilium brings you the newest innovation in the brow tinting industry: Hybrid Dye. A dye that mixes the benefits of henna and regular dye. It provides similar long-lasting and intense results to henna. The best thing about this brow and lash tint is that it requires shorter processing times, which means you will be done more quickly and can treat even more customers on a daily basis! It leaves you with defined brows and can even fill up spots in sparse brows.

The Brow & Lash Dye stains the skin up to 9 days* and the hairs up to 7 weeks. With the colors Black, Ash, Auburn, Light Brown, Medium Brown, Dark Brown you can cover all undertones and skin tones. The best thing is that you can mix the colors to get the most perfect shade for your customers.

HOW MANY TREATMENTS IN ONE KIT?

With one Brow & Lash Dye Kit you can perform up to 240 brow & lash treatments.

ALL THE BENEFITS OF HYBRID DYE:

✓ Semi permanent dye that stains the skin and hairs

✓ Brow tinting with long-lasting pigmentation:

- Hairs up to 7 weeks

- Skin up to 9 days*  

✓ Easy to use

✓ Makes eyelash tinting safe: Ammonia-Free, Paraben Free, Cruelty-Free

✓ Gel structure is consistent in usage

✓ High ROI: 1 tube = up to 40 treatments

✓ Can be used in combination with Brow Lamination & Lash Lifting

✓ Online courses available: free & certified

*When used in combination with the Prep Peel Gel.

Visit the separate product pages of the products in this kit to learn more about all the ingredients: 

Remember to always perform a patch test 48H before the treatment.

Please follow the instructions that come with the Brow & Lash Dye Starter Kit or follow our free or Certified Brow & Lash Dye course. 

Because of the excess oil of some skin types, there can be a tougher barrier that prevents the henna from penetrating the skin and leaving a long-lasting stain. In other words, it’s more difficult for oily skin to absorb henna on the skin.

This is why we introduced the Supercilium Color booster. With 2% saline, this product serves as a henna activator to make sure that henna pigment is absorbed much better and to intensify the color of the henna on the skin, which guarantees the client is able to enjoy her henna brow with a better and longer-lasting result.

The Color Booster will intensify henna stain and will extend the longevity of henna, especially for people with oily skin. If you add Color Booster, which contains 2% Saline, to the henna mix, it will make sure the skin absorbs the henna pigment much better. No matter how skilled you are, the expected brow henna results sometimes don’t show on the brows of clients with oily skin. 

What is Saline?

Saline is basically water that contains a high concentration of dissolved salts. Normally this is used for medical solutions, but in our research, we found out that because of its moisture-reducing abilities, it can also be used to intensify the henna color.

DIRECTIONS

Normally, you would mix one scoop of henna with 15 to 20 drops of the Color Developer. When adding the Color Booster to the mix the ratio is 1:1. So you replace half of the drops with the Color Booster.

For lighter henna colors (Blonde, Light Brown, Medium Brown): 

One scoop of henna + 15-20 drops: half Color Developer, half Color Booster.

For darker henna colors - (Dark Brown, Black, Auburn): 

One scoop of henna + 10-15 drops: half Color Developer, half Color Booster.

In case your mixture is still too thick, you can always add a few extra drops of the Supercilium Color developer.

Estimated X brow henna treatments for a single bottle of Color Booster.

INGREDIENTS

AQUA (WATER), SODIUM CHLORIDE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, CITRIC ACID.

The Prep Peel Gel is a gentle exfoliator created to use on the brows and surrounding area. The gel consists of 4% AHA that penetrates deep into pores to exfoliate and remove dead skin cells. Perfectly cleaned skin will improve the longevity of Brow Henna color and other brow treatments. 

AHA or Alpha Hydroxy Acid removes dead skin cells and unclogs pores. The cleaner the skin, the better the Brow Henna can penetrate the skin. Resulting in longer-lasting results. And isn't that all we are longing for?

Note: Exfoliating makes your skin more sensitive to the sun. Therefore always protect the brows with our Nourishing Aftercare balm with SPF 30. 48H after Brow Lamination and 24H after Brow Henna. 

HOW TO PREPARE THE BROWS FOR A BROW TREATMENT:

Step 1:  Clean the eyebrows with the Supercilium Pro Cleanser on a cotton pad. Gently go over the eyebrows. 

Step 2:  Squeeze a pea-sized amount of the Prep Peel Gel onto your hand, dip a micro brush in it and apply the gel evenly over the brows. 

Step 3:  Massage the gel gently into the hair and skin using your finger tips for 15-30 seconds. Make sure the gel also touches the skin underneath the eyebrow hairs.  

Step 4:  Remove the Prep Peel Gel with the Pro Cleanser and a clean cotton pad. 

step 5:  Proceed with your brow treatment, like Brow Henna, Brow Tint, microblading or powder brows. 

INGREDIENTS

AQUA(WATER), ALCOHOL DENAT.,GLYCERIN, LACTIC ACID, POLYSORBATE 20, HYDROXYETHYLCELLULOSE, PHENOXYETHANOL, SODIUM HYDROXIDE, CYMBOPOGON FLEXUOSUS (LEMONGRASS) OIL, CITRAL, CITRIC ACID, SODIUM LACTATE, SODIUM PCA, ETHYLHEXYLGLYCERIN, MALIC ACID, GLYCOLIC ACID, GERANIOL, PYRUVIC ACID, TARTARIC ACID, LIMONENE, LINALOOL, ISOEUGENOL.

This Kit includes:

1x 15ml Supercilium Lash and Brow Dye of the color selected

1x 20ml Supercilium Oxydant Developer

1x Supercilium Angled Application Brush

The Brow & Lash Dye is ideal for clients wanting longer-lasting, bolder results. This brow tint not only stains the skin and hairs for darker brows but the hybrid dye can also be used to dye lashes!

The gel structure of the dye will guarantee consistent results on all skin types and give you voluminous brows and dark lashes. It can even cover up grey hairs. The Brow & Lash Dye will give the appearance of fuller brows and has a more rich and bright effect than regular dye, and takes less time to process than henna. For the lashes, it will give a darker and more dramatic look than regular eyelash tinting. No mascara is needed anymore for your tinted lashes with beauty treatments like this. 

PROCESSING TIMES 

Brows:
For an Ombre effect on any brows remove just the fronts of the brows after 3-5 minutes with a damp cotton pad. 
Gentle effect: For a gentle tint effect, remove the rest of the dye after 8-10 minutes from the brow hairs to give your client a softer and more natural look.
Statement look: If a stronger, more statement look is what your client desires then remove the remaining dye after 10-15 minutes.
Extra bold: Finally for those clients who want the full tattooed, bold brow effect then remove the dye after the maximum processing time of 15-20 minutes resulting in dark hair.

Lashes:
Subtle look: 5-7 minutes for a more subtle look suited to very fair clients with light hair or transparent lashes.
Intense look: Leave on for 8-10 minutes for a deep, dark brown mascara effect. 

STEPS
 
STEP 1:Cleanse the eyebrow area/eyelashes with the Supercilium Pro Cleanser. It is also suitable for sensitive skin as it doesn't contain any harsh chemicals. For the brow area: Use the Supercilium Prep Peel Gel to get rid of excess sebum, make-up buildup, and dead skin cells to ensure the longevity of Brow Dye treatments. Apply one drop on each eyebrow, massage it gently into the brow for 15 seconds and carefully remove it with a cotton pad with Supercilium Pro Cleanser. If needed you can add a double cleanse by using the Color Booster to degrease the skin and hairs. 

STEP 2:Apply Brow Paste to the area around the eyebrows, avoiding zones you are going to tint. Apply a thin layer of Brow Paste to the area around the eyes, avoiding touching the eyelashes. Set the protective eye pads along the edge of the lower eyelids, having the lower eyelashes out from under the eye pads. 

STEP 3:In a non-metallic tare, mix Oxydant Developer and Brow & Lash Dye thoroughly in a ratio of 1:1 until a homogeneous consistency. We recommend using 0.5 cm of dye/ brow tint and an equal proportion of Oxydant Developer. Let the dye sit for one minute before you apply it. 

STEP 4:Using a Medium Angled Brush, quickly and evenly apply a thin layer of the prepared mixture to the eyebrows, strictly to the desired shape. Carefully tint the skin with the dark brown mixture by raising the eyebrow hairs. Watch out for the clarity of the lines. Carefully and evenly apply the dye to the eyelashes. During the tinting procedure, the eyes should be closed.

STEP 5:With the dark brown Brow and Lash Dye the processing time for eyebrows is 8-20 depending on the desired result: the more intense shade and tinting effect you want, the more time you need. The processing time for eyelashes is 5-10 minutes.

STEP 6:After processing, remove the dark brown dye from the eyebrows/eyelashes with a wet cotton pad. Wash off the residues with water. Do not open the eyes until the dye is completely removed. The result of tinting depends on the type of skin, color type, individual organism characteristics.

STEP 7:If you accidentally tinted the skin, apply a small amount of Color Corrector to a micro brush or cotton swab and gently wipe this area. Repeat if needed to remove brow tint where it doesn't belong for perfectly defined arches without stains. Wash off the residues with water.

The Oxydant Developer is a product created especially to mix with every color of thee Brow & Lash Dye. The texture of the Oxydant Cream makes it easy to mix the dyes and provides consistent and long-lasting results for all brow and lash treatments.

All supercilium Brow and Lash Dye products should be mixed on a 1:1 ratio. This means you have to use equal parts of dye and the cream developer. Mix the dye and developer together in a non-metallic dish. Mix the products until the color is consistent and the texture is smooth. Leave the dye to sit for 1 minute, before applying to the brows or lashes. This minute is needed to begin the oxidizing process and is very important to get the right results with the oxydant cream. 

Note: always do a patch test at least 48 hours before using the Brow & Lash Dye or related products on new clients and clients that haven't done a tinting treatment in the last 6 months. 

INGRIDIENTS

WATER, HYDROGEN PEROXIDE, CETEARYL ALCOHOL, CETEARETH, PHOSPHORIC ACID, TETRASODIUM PYROPHOSPHATE, SODIUM STANNATE.

The Supercilium Brow Mixing Set is an ideal supplement to your current Brow Henna tools. 

Contains:

- Tiny spoon: 0,25g

- Mixing cup with measurements

- Dye applicator

Mix one scoop of henna with 10-20 drops of Color Developer. Lighter Brow Henna colors require more drops than darker colors. 

The Nourishing Defense Balm with SPF 30 is used before  brow treatments for henna, PMU, or tattoos to ensure longer-lasting results. The nourishing balm protects the skin from free radicals and offers protection from UVA and UVB rays. With its natural oil, it nourishes sensitive skin and provides anti-inflammatory treatments. The SPF protects the brow against sun damage. Together the perfect upsell aftercare product for your clients

As a Brow Artist brow care should be your number one priority! Provide your customers with extra nourishing brow care with the Defense Balm with SPF 30. Perfect for them to use as After Care treatment.

DIRECTIONS

Apply the Nourishing Defense Balm with SPF 30 gently onto the treated area with a Q-tip or cotton pad.

INGREDIENTS

PETROLATUM, OCTOCRYLENE, ETHYLHEXYL METHOXYCINNAMATE, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, PARAFFINUM LIQUIDUM,  HEMP SEED OIL, TOCOPHEROL, HELIANTHUS ANNUUS (SUNFLOWER) SEED OIL, HEMP SEED EXTRACT.