Leave to develop for up to 20 minutes. (Can be done in as little as 7 min)
Remove with damp cotton pad.
Store at a temperature from +5°C to +25°C.
Store away from heat and direct sunlight
Patch test 48 hours before:
We recommend to patch test at least 48 hours before treatment and to do so by applying mixed tint to the skin, waiting 10 min, washing off. Any allergic reaction should occur after 48 hours. Clients who are allergic to Developer for hair color will likely be allergic to this tint!
Official Bronsun Color Theory Guide, Official Bronsun Starters Guide, Microaritstry Bronsun Mixing guide and quick tips
These documents are available as a download after checkout and will also be emailed when order tracking confirms delivered in case you forget to download at checkout!
This is the larger version of the dye, 15ml. Another option to purchase is the Bronsun Tint KIT.
Eyebrow tinting with henna effect
BRONSUN® gel dye helps to creategraphic and voluminous eyebrowsregardless of clients’ color types and quality of their eyebrows: even affected by excessive correction, sparse and thin ones will look flawless after the tinting.
Intensively tints the skin as if it was dyed with henna. Besides a dye tinting procedure itself is much easier and faster!
Due to its formula, BRONSUN® gel dyegently tints eyebrow hairs.
The bottle the developer comes in is a nightmare can never get the correct amount out. Other than that the tint was good lasts good amount of time.
Hi Veronica! I agree! I use this in my studio. I love the tiny bottles that come with the Tint Kit because they are thinner and easier to squeeze. This large bottle is best stored upside down- just squeeze it a little to remove excess air before storing upside down so it doesn't shoot out when you open next time! <3 Amber
Omgg my items came super fast ! And definitely will be shopping again
01 Cleanse the eyebrow area from makeup and other impurities with an oil-free product. If needed, additionally degrease the area with saline solution or degreaser.
02 Apply protective zone gel or paste to the area around the eyebrows, avoiding zones you are going to tint.
03 In a non-metallic tare, thoroughly mix Milkcream developer BRONSUN and Eyebrow and eyelash cream dye BRONSUN in a ratio of 1:1 until homogeneous consistency. We recommend using 0.5 cm of the dye and an equal amount of the developer.
04 Using a brush, quickly and evenly apply a dense layer of the prepared mixture to the eyebrows, strictly according to the desired shape, leaving no gaps. Thoroughly tint the skin by raising the hairs. Watch the clarity of the lines.
The exposure time for the dye on eyebrows is 10-20 minutes. The shade intensity and tinting degree on skin depends on the exposure time.
06 As the exposure time is over, carefully remove the dye with a wet cotton pad. Thoroughly rinse off the dye residues with water. The tinting result depends on the skin type, color type, individual characteristics of the skin.
In case you accidentally tinted the skin, apply a small amount of Removal composition BRONSUN onto a microbrush or cotton swab and carefully wipe this area. Repeat if needed. Rinse off the product residues with water.
Eyelash Tint Instructions:
01 Cleanse the area around the eyes from makeup and other impurities with an oil-free product. If needed, degrease the eyelashes with saline solution.
02Apply a thin layer of zone gel to the area around the eyes, avoiding contact with the eyelashes. Set the protective pads along the edge of the lower eyelids, having the lower eyelashes got out from under the pads in case you are going to tint them. In no case mix gel dye and cream dye BRONSUN
03 In a non-metallic tare, thoroughly mix Milk-cream developer BRONSUN and Eyebrow and eyelash cream dye BRONSUN in a ratio of 1:1 until homogeneous consistency. We recommend using 0.5 cm of the dye and an equal proportion of the developer.
04 Using a brush, carefully and evenly apply a dense layer of the dye to the eyelashes.
During the tinting procedure the eyes should be closed.
05 The exposure time for the dye on the eyelashes is 10-15 minutes.
06 As the exposure time is over, remove the dye with a wet cotton pad. Thoroughly rinse off the dye residues with water. Do not open the eyes until the dye is completely removed from the eyelashes. The tinting result depends on the color type, individual characteristics of the organism
Bronsun Milk Cream Developer
194 in stock
In stock now! Order your Bronsun Milk Cream developer for your Bronsun "tint only!"
3%, 10V developer. Gentle for brows and lashes and formulated to be used with Mayamy Brow Lamination (Thio) and Protein Reconstruction (cysteine) kit.
Bronsun Dye Remover 20ml
192 in stock
This product NOW includes a digital download of:
Official Bronsun Color Theory Guide, Official Bronsun Starters Guide, Microaritstry Bronsun Mixing guide
Bronsun Tint Remover 20ml
Don't forget your Bronsun tint remover when you purchase your Bronsun tint!
This remover is perfect for helping you to create an ombre brow with your tint. Clients don't like harsh brow lines!
Gentle and effective!
Pre-Order Aqua Drops NOW
The World's first Liquid Hybrid infused with a bond-builder AND Henna-free! Long Lasting skin stain, and SAFE Post-lamination! Pre-order NOW, Shipping early June.